What is wiTECH system?
The wiTECH ™ Access Gateway is a diagnostic tool network that provides secure, reliable wireless communications capability and firewall protection, taking the burden of tool network setup out of the hands of the technician.
How do you set up a micro pod?
- On the PC, open the microPOD Setup Utility and leave the microPOD Setup Utility running in the background.
- Connect the microPOD to your computer via the USB cable you were provided.
- If required, complete software updates to the microPOD device.
- Click on the gear in the vehicle selection screen.
How do I use wiTECH 2.0 with J2534?
To launch the Chrysler J2534 Flash Application from wiTECH 2.0, follow these steps:
- Download and install wiTECH 2 J2534 application from Aftermarket Subscription Portal https://www.mopartsp.com/login.
- Launch the wiTECH 2.0 – J2534 application.
- Click on Connect > Switch to Chrysler J2534 Flash Application.
What is the factory scan tool for Toyota vehicles?
The Toyota/Lexus current factory tool is the laptop-based application called ‘Toyota TechStream’. This package was introduced to the Toyota/Lexus dealers as a replacement for the hand-held Vetronix built ‘Toyota Mastertech’ factory scan tool.
How do I download a Flash file from Tech Authority?
You will need to go to the www.techauthority.com website to download the applicable flash files before you click NEXT. Open Internet Explorer and go the website. to identify the vehicle being programmed. Enter one of the available options, scroll to the bottom of the pane and click on “Submit”.
What is DRB III emulator?
This is the exact scan tool software application used in Chrysler, Jeep, and Dodge dealerships to service non-CAN based vehicles from 1998-2007.
What is Pass Thru programming?
Pass Thru Programming Devices. The Snap-on Pass Thru programming products bring OEM-level reprogramming to the independent shop. Replace the existing software/firmware in electronic control units (ECUs) with updated OEM software. Fix software-controlled driveability issues and emission issues, program new ECUs.
What does the Mopar MicroPod 2 do?
It replaces your StarMobile, StarScan, and wi-TECH POD, and enables your technicians to increase their productivity and provide world-class diagnostic services to your customers.
What is a drb3?
Is there something like Forscan for Toyota?
TechStream for Toyota/Lexus is a very good tool. A J2534 device will connect to the Toyota/Lexus combinations. If you have an OBD II device, there are plenty of Android applications that will work. The better the OBD device, the better the application with Android or a Laptop.
What is J2534 used for?
J2534 is a concept that enables flash programming of an emission related ECU regardless of the communication protocol that is used by the ECU. The purpose is that only one tool (hardware device), often referred to as the pass-thru device, should be needed for all kind of ECUs.