What is the biggest cam for stock LS3?
The 8710 cam picks up 26 degrees of intake and 31 degrees of exhaust duration at 0.050, and 0.074/0.080-inch lift. It clears the stock pistons, making it the largest drop-in cam Summit offers for a daily driver.
How much is a set of LS3 heads?
Starting at $3999. Set of two (2) FED F-Series F310 (LS3 rectangle) 285cc cylinder heads. Heads are complete and assembled. Valve covers, oil fill cap, and doweled rocker stands included with purchase.
Are RHS LS3 heads good?
The Best Value in LS Heads – RHS Pro Action LS3 Heads are simply the best bang for the buck LS heads available. Made from premium materials with excellent attention to detail and available with several COMP Cams spring kits, this is the best value in LS heads.
Can you put a LS7 cam in a LS3?
You could use an aftermarket rocker (stock LS7 rockers are unique to the LS7 head and won’t work on an LS3 style head) but I’ve always heard it’s preferred to use the cam to increase lift over rockers.
How much HP can you get out of a LS3 engine?
850 to 1,000 horsepower
Both the LS3 and L99 engine blocks can be pushed to 850 to 1,000 horsepower. Both engines use rectangle port cylinder heads and have a common 4.065-inch bore diameter. They also have the internal oil passages for Active Fuel Management (AFM), even if unused.
How much hp can LS3 heads handle?
The LS3 and L99 are both Gen IV, 6.2L, aluminum block, car engines which came under the hoods of GM performance cars between 2008 and 2017. Both the LS3 and L99 engine blocks can be pushed to 850 to 1,000 horsepower. Both engines use rectangle port cylinder heads and have a common 4.065-inch bore diameter.
Can I boost a stock LS3?
“[To get 500 horsepower] we’d run about 8- or 9-pounds of boost and know that that stock engine is going to be just fine. The LS3 [internals] will handle boost very, very well, as long as you don’t get greedy with it,” said Stenod Performance’s Joe Borschke.
How much does it cost to Cam a LS3?
Around here the shops charge around $2500 for parts and labor for an LS3 cam install.
How much HP can you get out of a LS3?
Both the LS3 and L99 engine blocks can be pushed to 850 to 1,000 horsepower. Both engines use rectangle port cylinder heads and have a common 4.065-inch bore diameter. They also have the internal oil passages for Active Fuel Management (AFM), even if unused.