How long does it take for ArmorSeal Rexthane to dry?
ArmorSeal Rexthane I @ 2.0 – 3.0 mils dft/ct Wood: Clean, dry, sound, smoothSteel with Zinc Metalizing: Steel with Zinc1 ct. ArmorSeal Rexthane I Clear, mist coat, reduced Metalizing: Clean, dry, sound (clear coat only) 30% with R7K100. Allow to flash for 20 minutes. 1 ct.
Is ArmorSeal tread Plex an epoxy?
100% Solids Self-leveling Epoxy — ArmorSeal®Tread-Plex Primer.
How do you mix ArmorSeal 1000 HS?
Combine one Part A with one Part B by volume and mix for 3 minutes and until uniform. Allow the material to sweat-in as indicated. Re-stir before using. NOTE: Brush or roll application may require multiple coats to achieve maximum film thickness and uniformity of appearance.
Is ArmorSeal 8100 an epoxy?
A two-component, water-based polyamine epoxy floor coating. The next-generation in water-based epoxy floor coatings, Armorseal® 8100 features excellent chemical and abrasion resistance and is breathable. It is designed for use in commercial, industrial and residential floor applications.
What is Armorseal Rexthane used for?
Armorseal Rexthane II is a high solids, single component, aliphatic, moisture cure urethane, industrial coating. This urethane coating cures to a high gloss and chemical resistant film equivalent to two-part urethane coatings.
What Sheen is Armorseal tread-Plex?
Low Sheen
Price
| Product # | Sales Number | Sheen |
|---|---|---|
| B90W00110 | 640321824 | Low Sheen |
| B90W00110 | 640321832 | Low Sheen |
Does Armorseal tread-plex need primer?
Surface must be clean, dry and sound. Remove any oils and dirt from the surface using a degreasing solvent or strong detergent. Sand to remove any loose or deteriorated surface wood and to obtain a proper surface profile. Prime with recommended primer and paint as soon as possible.
How long does it take Armorseal 8100 to dry?
28 days
Concrete and mortar must be cured at least 28 days @ 75°F (24°C).
What Armorseal 8100?
ARMORSEAL 8100 is the next generation in water based epoxy floor. coatings; a two-component polyamine epoxy with excellent chemical and. abrasion resistance that is breathable. It is designed for use in commercial, industrial and residential floor applications.
What is Rexthane used for?
Armorseal Rexthane I. High-solids, single component, aliphatic, moisture-cure urethane, VOC-complying, moisture resistant industrial floor coating. This urethane coating cures to a high gloss and chemical resistant film equivalent to two-part urethane coatings.
Does Armorseal tread plex need primer?
Can Armorseal tread Plex be used on wood?
For use over prepared concrete and wood floors, steps, stairwells, aisleways, or previously painted floor surfaces in sound condi- tion. ASTM D2794 30 in. lb.
What Sheen is Armorseal tread Plex?
Is Armorseal tread Plex waterproof?
ARMORSEAL TREAD-PLEX is a general purpose, interior/exterior, 100% acrylic, low odor, waterborne floor coating. This dries rapidly to a tough, alkali resistant finish which will withstand hard wear, abrasion, grease, oils, and cleaning equipment.
How do you mix Macropoxy 646?
Sherwin-Williams® MACROPOXY® 646 is composed of two components and should be mixed by thoroughly at a low rpm with an air-powered mixer to ensure proper performance of the coating. Additionally MACROPOXY® is often combined with other coatings like Zinc and a urethane top coat.
What is Armorseal tread-plex used for?
Armorseal Tread-Plex. A one-component general purpose, interior and exterior waterborne floor coating. This dries rapidly to a tough, alkali-resistant finish which will withstand hard wear, abrasion, grease, oils and cleaning equipment.
What is armorseal HS polyurethane?
A heavy-duty industrial floor coating, Armorseal® HS Polyurethane Floor Enamel provides a high gloss, excellent chemical resistance, color retention and chalk resistance. Armorseal HS is a multi-component product.
What is Hi solids polyurethane?
Hi-Solids Polyurethane A two-component aliphatic, acrylic polyurethane finish. Hi-Solids Polyurethane is a two-component, aliphatic, acrylic polyurethane resin coating. It is designed for high-performance protection with outstanding exterior gloss and color retention.
What is arm R Seal oil based top coat?
Arm-R-Seal Oil Based Topcoat Arm-R-Seal Oil-Based Topcoats are made with the highest-quality urethane resin, making them extremely durable and long-lasting. Formulated to be wiped on with a cloth or applied with a foam brush, this ambering finish penetrates to provide deep-down protection for that “natural” look.
What is Hi-solids polyurethane finish?
A two-component aliphatic, acrylic polyurethane finish. Hi-Solids Polyurethane is a two-component, aliphatic, acrylic polyurethane resin coating.