How do I reset my Canon printer software?

1 Factory Reset

  1. Press Setup.
  2. Press the arrow buttons until you navigate to Device settings and then press OK.
  3. Press the arrow buttons until you navigate to Reset setting and then press OK.
  4. Press the arrow buttons until you navigate to Reset all and then press OK.
  5. Select Yes.
  6. Press OK. Your device is now reset.

How do you reset Canon Pixma 2540s?

Instead, you simply need to override the empty error message that is being displayed by holding down the “stop / reset” button on the printer for around five seconds. The printer should continue printing, and use any of the remaining ink in the cartridge.

How do I fix a printer driver error?

How to Fix a Printer Driver Error

  1. Go to the printer manufacturer’s Web site and search for print drivers, printer drivers or drivers.
  2. Find the right driver for your printer model.
  3. Download and install the driver [source: Adobe]. You may have to restart the computer after installing the new driver.

How do I update my Canon printer driver?

Update the firmware

  1. Turn on the printer.
  2. Make sure the printer is connected to the Internet.
  3. Press MENU, select Setup, and press OK.
  4. Select Device settings and press OK.
  5. Select Firmware update and press OK.
  6. Select Install update and press OK.
  7. Select Yes and press OK to confirm that you want to update the firmware.


  1. Move to the printer, then press on the control panel. The RESET menu is displayed.
  2. Select SOFT RESET using and .
  3. Hold down until HARD RESET is displayed, then release the button.

How do I reset my Canon Pixma printer to factory settings?

You can perform a factory reset on a Canon Pixma printer by following these simple steps:

  1. Start your printer.
  2. Go to the menu, scroll with the arrows, and find and select ‘Device Settings.
  3. Press ‘OK.
  4. Select the ‘Resetting’ option.
  5. Press ‘OK’ to begin the device resetting process.
  6. Turn off your Pixma printer.

How do I hard reset my Canon printer and fix common errors?

And then reased release the stop button for two seconds. And then hold the power button down and press the stop button five times and this will put it into a hard reset mode.

How do I reset my ts3329?

Wait until power button stops blinking light just press on the on button to turn off. This will restart your Canon printer on your computer you need to install new driver.

How do I get my Canon printer out of error mode?

If the above solutions don’t help, you can reset the printer as follows:

  1. Switch on the printer.
  2. Press and hold the Stop/reset button.
  3. Press the button that you use to make a color copy and hold it down.
  4. Wait 5 seconds.
  5. The printer now reboots and sets itself up.

How do you reset your printer?

How to Reset your HP Printer | HP Printers | HPSupport – YouTube

How do I reset my printer to factory settings?

1. On the printer display home screen, select the “set up” button (it looks like a gear). 2. Select “settings” > “device settings” > “reset settings” > “reset all” > “OK” and then “Yes.”

How do you reset your printer settings?

  1. Touch or swipe down the tab at the top of the screen to open the dashboard on the printer control panel.
  2. Select “Setup” and then select “Printer Maintenance”
  3. Select “Restore” and then select “Restore Factory Defaults”
  4. A message appears stating that the factory defaults will be restored.

How do I get my Canon printer out of error state?

Reinstall the Canon Printer Software/Driver
If the installation of the Canon printer driver/software is corrupt, then you may encounter the error state message. In this context, reinstalling the printer application/driver may solve the problem.

How do I reset my printer?

How do I fix my Canon Pixma printer not responding?

Top 4 Methods to Fix Canon Printer Not Responding Issue [Partition Magic]

  1. Method 1: Run the Printer Troubleshooter.
  2. Method 2: Reboot the Print Spooler of Canon Printer.
  3. Method 3: Disable the Third-Party Firewall.
  4. Method 4: Configure the Printer Port Correctly.

How do I get my printer out of error mode?

How to Fix the “Printer in Error State” in Windows 10

  1. Ensure the Printer Is Properly Connected to Your PC. The first thing to verify is your printer’s connection with your PC.
  2. Reboot the Printer.
  3. Verify the Paper and Cartridge Ink Levels.
  4. Reinstall the Printer Drivers.
  5. Automate the Print Spooler Service.
  6. Update Windows 10.

Why does my Canon printer keep saying error?

Canon printers produce error codes for one of several reasons: The settings for your printer might not be compatible with the document you’re trying to print. The loading bay for your paper might have become lodged with paper or you’re using the wrong type of paper.

Why do you need to reset your printer?

If you are having trouble getting your cartridge to read properly or are having connectivity issues with your printer, sometimes a hard reset will resolve the problem. Power down the printer and then unplug the power cord from the printer and the wall.

What will happen if you reset a printer?

If you’ve tried all possible solutions and you still can’t print to your printer, reset the printing system. This process deletes all printers from your list of printers, deletes information about all completed print jobs, and deletes all printer presets.

What happens if I restore factory defaults on my printer?

Restoring the factory-set defaults returns most of the settings to the factory defaults. It will not reset the page count, tray size, or language.

How do I fix a Canon printer error state in Windows 10?

How can I fix Printer in error state message?

  1. Make ports settings changes. Press Windows + R , type devmgmt.
  2. Make sure that your printer is Online.
  3. Reinstall the printer driver.
  4. Set the Print Spooler service run automatically.
  5. Update Windows.

Does unplugging a printer reset it?

If the power cord is unplugged, the date/time settings will be reset and all documents stored in the printer’s memory will be lost.

What are the possible causes if the printer is not responding?

There are many reasons which can cause the Printer is not responding problems on your computer. It can be a paper jam, issues with ink cartridges, spooler services that may need your attention or your printer may not be set as default.

What to do if printer is not responding?

How do I fix my printer, not responding? (Windows)

  1. Make your printer the default option. Click on the Start button and then go to Settings > Devices > Printers & scanners.
  2. Clear Print queue.
  3. Restart Print Spooler Service.
  4. Re-Add your printer to your PC.
  5. Restart your Windows PC.

How do I get my printer out of error state?

If your printer’s status displays “Printer in error state,” there may be a problem with the printer itself. Make sure the printer is turned on and connected to your PC by Wi-Fi or cable. Check it for low paper or ink, and be sure the cover isn’t open and the paper isn’t jammed.

How do you manually reset a printer?

It’s a pretty simple process:

  1. With the printer turned on, pull out the power cable from the back of the printer.
  2. Unplug the power cable from the wall outlet.
  3. Wait 15 seconds.
  4. Plug the power cable into the back of the printer.
  5. Plug the printer back into the wall outlet.
  6. Turn the printer back on.
  7. Run a test print.

How do I reset my printer back to factory settings?

How do you hard reset a printer?

How do I set my printer back to default?

To choose a default printer: Select Start > Settings . Go to Devices > Printers & scanners > select a printer > Manage. Then select Set as default.

Previous post What is the best weapon for a Sorcerer in ESO?
Next post Where does the goddess Namaka live?