What is the EVIC button?
The system allows the driver to select information by pushing the following EVIC Control buttons located on the left side of the steering wheel: EVIC Control Buttons. UP Arrow Button. Push and release the UP arrow button to scroll upward through the main menu items.
How do I reset my Jeep JL screen?
Turn off your vehicle and wait for the UConnect display to go completely black. Afterwards, open and close the driver’s door and restart the vehicle. Upon restarting the vehicle, the UConnect system, along with its radio, should be reset.
How do you reset the touchscreen on a Jeep Wrangler?
Ensure your vehicle is in park and in “Run” mode. Press and hold down the volume and tuner knob buttons at the same time. Hold down the knobs for 10 – 20 seconds. After holding down the knobs, the screen should flash your vehicle brand name and then go dark.
How do you reset the radio on a 2008 Jeep Wrangler?
Resetting the Jeep Wrangler UConnect Radio System
- Start your vehicle and press down on the ‘voice recognition’, and ‘phone’ buttons located on the steering wheel.
- Turn off your vehicle and wait for the UConnect display to go completely black.
- Afterwards, open and close the driver’s door and restart the vehicle.
How do I force restart Uconnect?
How to Reset Uconnect®: Step-by-Step
- Turn your key in the ignition to “Run,” but leave the car in park.
- Simultaneously press the volume button and the tuner knob at the same time.
- Continue pressing them down for 10 – 20 seconds.
How do I reset my JL radio?
Press the phone and VR button on the steering wheel. Hold them both down for 30 seconds. When the time is up, turn off the vehicle, and open your driver side door for 30 seconds. Close the door and restart the vehicle.
How do I reset UConnect?
Simultaneously press the volume button and the tuner knob at the same time. Continue pressing them down for 10 – 20 seconds. After pressing the buttons for 10 – 20 seconds, the touchscreen display should flash the brand of your vehicle (FIAT, RAM, or Dodge), then proceed to go dark.
How do I reset my UConnect 730n?
Turn the ignition to the off position. Open the driver side door and leave it open for 30 seconds. 3). That’s it.