What is the best product to level a floor?
Akona – Best Overall Floor Leveling Compound. Sikafloor – Best Acrylic Concrete Floor Leveler. Henry – Best Leveler For Thickness. LevelQuick – Best Leveler For Final Surface.
What is a good floor leveling compound?
The Henry Level Pro 40 lb. Self-Leveling Underlayment is an easy-to-use, cement-based underlayment that self-levels. Just mix it with water, pour and spread. The underlayment is excellent for smoothing and flattening interior surfaces before installing floor coverings.
What can ardex be used on?
ARDEX CD™ is a concrete resurfacing compound modified with high-performance polymers for exceptional bond strength. ARDEX CD can be used over the surface of existing concrete to produce a new wear layer as well as to fill in small surface defects, such as spalls and gouges.
How thick can you pour ardex?
ARDEX K 521™ is a pourable, polishable, self-leveling topping for fast-track resurfacing of indoor concrete. ARDEX K 521 can be installed from a minimum thickness of 3/8″ (9 mm) up to a maximum thickness of 2″ (5 cm).
How thick can ardex be applied?
Does ardex need a primer?
NON-POROUS SUBSTRATES: ARDEX FEATHER FINISH will bond to some non-porous substrates, such as burnished concrete, terrazzo, and ceramic and quarry tile, without the use of a primer.
Will self-leveling concrete crack?
A DIY self-levelling cement job might look good for a few months, maybe even a couple years. But if it’s not done properly, eventually it can start to crack.
What is ardex self leveling?
ARDEX K 301™ Exterior Self-Leveling Concrete Topping is a self-leveling topping and underlayment for fast-track resurfacing and smoothing for exterior and interior applications over concrete and approved, properly prepared, non-porous surfaces, including terrazzo, epoxy coatings and ceramic and quarry tile – on, above …
How long does ardex take to cure?
If installing wood flooring, or, if high-performance adhesives will be used, such as epoxies or urethanes, please note that the ARDEX FEATHER FINISH must first be allowed to cure for 16 hours.
Do you need to seal concrete before using floor levelling compound?
It is recommended that the concrete surface is primed with a primer before applying the leveling compound. This is meant not only to improve adhesion with the leveling compound but also to serve to seal the concrete slab beneath.
Can self-leveling concrete be used as a finished floor?
At the same time, self-leveling concrete can be used as a standalone, finished flooring material. It’s durable enough to hold up to everyday wear and tear. Its raw, industrial look also looks great with many different design themes.
How hard is ardex?
High compressive strength, over 7,800 psi. Exceptional bond strength. Smooth existing concrete prior to installing vinyl and other floor coverings in critical areas. Easy to mix and apply.
https://www.youtube.com/watch?v=zcCWaYxPUcY