What is an SOT package?
Small Outline Transistor (SOT) packages are very small, inexpensive surface-mount plastic-molded packages with leads on their two long sides. Due to their low cost and low profile, SOT’s are widely used in consumer electronics. The SOT-23 and the SC-70 packages are two of the most widely used SOT packages today.
What does SOT package mean?
Do 214AA vs do 214AB?
DO-214AA, also known as SMB, is the middle size. DO-214AB, also known as SMC, is the largest size. DO-214AC, also known as SMA, is the smallest size.
Is SOIC and sop the same?
Another name of SOP is called SOIC, JEDEC standard are called SOIC in the United States, and JEITA standard one is called SOP in Japan, and the body width of the former one is larger than the latter. It was developed to reduce space required on the substrate more than DIP.
Do diodes do 214?
DO-214 is a standard that specifies a group of semiconductor packages for surface-mounted diodes.
What is the difference between SOT23 and Sot 23-3?
Note that SOT 23 and SOT 23-3 are just names, they don’t have any definition. They have just entered the language through use and custom. JEDEC formally standardises dimensions, its TO-236AB package outline is the JEDEC title for what is known as SOT 23 and SOT 23-3.
What is the difference between sot89-3 and SOT54?
SOT54 is an alternate designation for the JEDEC TO-92 package. The SOT89-3 electrically only has three leads (contact/pin). The wide lead (tab) is physically part of the middle lead on the other side of the package. Some call this package a SOT89-4, since it visually appears to have four leads when looking down at the part.
What is a sot 23 transistor?
In the beginning of the surface mount era was SOT 23, which had three pins. It was used mainly to replace the very popular TO-18 and TO-92 3 pin leaded transistor packages, the name means Small Outline Transistor. As such, three pins in a triangular configuration was easy to read, as it echoed the three pin leaded package.
What is the JEDEC title for Sot 23?
JEDEC formally standardises dimensions, its TO-236AB package outline is the JEDEC title for what is known as SOT 23 and SOT 23-3. Show activity on this post.