How do I reset my Bose CineMate remote?
Reset the universal remote.
- On the remote control, press and hold a source button (i.e., TV or CBL-SAT) until all six source buttons glow, then release. The button that was held remains glowing.
- On the number keypad, enter 981. The source buttons flash to confirm.
- Reprogram the remote.
How do I sync my Bose remote to my TV?
To program your remote:
- In the Bose Music app, tap the Settings icon. in the upper-right corner. Tip: If the a different product is shown, tap the My Bose icon.
- In the Universal Remote section: Select TV to program the system to control your TV.
How do you program a Bose remote control?
To program your remote:
- Power on your system.
- On the system console, press the Setup button.
- On the remote control, scroll down to select [Source] setup, then press the OK button.
- Select a programming mode:
- Follow the on-screen instructions to complete programming.
How do I pair my Bose Cinemate Series 2?
To connect the components of your system:
- Connect Interface Module to the input jack on the bass module.
- Connect the single-plug end of the speaker cable to the SPEAKERS jack on the bass module.
- Connect the other other end of the speaker cable to the speakers:
How do I turn on my Bose CineMate remote?
Look at the top edge of the remote through a digital camera (i.e. a smartphone camera), then press a button on the remote.
Why does my Bose remote not work?
Try new batteries in the remote. In case the battery or batteries in your remote are low or have no power, replace them. Alkaline batteries are recommended over rechargeable batteries, which might output lower voltage.
How do I reset my Bose CineMate 1sr?
Turn the product off. Unplug the speaker array power cord from the power outlet. Unplug the Acoustimass Module power cord from the power outlet. Wait 30 seconds.
How do I know if my Bose remote is working?
Look at the top edge of the remote through a digital camera (i.e. a smartphone camera), then press a button on the remote. If you do not see a flash through the camera viewfinder when a button is pressed, the remote is not sending any signal*.
How do you program a Bose universal remote?
– Turn on TV. – On the Bose remote, press and hold the TV button until all six source buttons glow, then release. – on the number keypad, enter 00060 and press volume + – To test, press MENU on the remote and the TV menu should appear.
How do I program a Bose remote for my TV?
“Turn on” the remote, tap on the device button (TV, DVD, CBL and OK/SEL) for 3 seconds. The LED light indicates the device is ready to program. Point out the remote to device and click on “CH+” & “CH-“ switches. Remote will show on/off signals.
How to program a Bose universal remote?
“Turn on” the Device
How do I Reset my Bose CineMate?
– Turn the system off. – Unplug the Acoustimass module power cord from the power outlet. – Wait 60 seconds. – Plug the Acoustimass module power cord into a working power outlet. – Turn the system on.