Where does the heavier weight go on a grandfather clock?
Grandfather clocks are weight driven. Pick up the weights one at a time and turn them upside down. Look for the letters “L,” “R,” or “C.” Arrange them left to right on the floor in front of the clock with “L” being the left hand weight, “C” being the center weight and “R” being the right hand weight.
How would you adjust the pendulum of a grandfather clock if it were running too slow?
If your grandfather clock is running slow or fast, it is easy to adjust and regulate it. Changing the speed of time keeping is accomplished by moving the pendulum disk up or down. The pendulum disk is moved up or down by turning the adjustment nut.
Why won’t My grandfather clock keep running?
1) Examine the dial on the grandfather clock and check to make sure the hands are not touching or hanging on any parts of the dial or second hand. 2) Check the leveling of the grandfather clock. There are 4 adjustable levelers on the bottom corner of most grandfather clocks.
Can you adjust chimes on grandfather clock?
If you need to make adjustments, you can do so by way of a small screw located under the pendulum. Turn it left to slow the clock down or right to speed it up. Use tiny adjustments over time. Wait at least a day after each adjustment to evaluate the clock’s performance before making further change.
Which way do you adjust the pendulum on a clock?
Stop the pendulum to move the pendulum bob up or down to change the pendulum’s effective length. If the clock is running fast, move the bob down or turn the nut to the left. If the clock is running slow, move the bob up or turn the nut to the right. Restart the pendulum and reset the clock hands to the proper time.
How do I set the hands on my grandfather clock?
Moving the hands in either the Clockwise or counter Clockwise direction while the automatic chime sequencing is in operation could damage the chime mechanism. 7. STARTING THE GRANDFATHER CLOCK Reach through the front door of the Grandfather Clock and place your hand on the side of the pendulum disk.
What is the grandfather clock model number and serial number for?
The Grandfather Clock model number and serial number are essential for obtaining parts or service.
What happens if the grandfather clock stops for 24 hours?
If the Grandfather Clock stops for more than 24 hours, the moon dial will also stop, and must be reset when the Grandfather Clock is started again. 6.
What does the moon dial do on a grandfather clock?
The moon dial is now set and will indicate the proper moon phases as long as the Grandfather Clock operates continuously. If the Grandfather Clock stops for more than 24 hours, the moon dial will also stop, and must be reset when the Grandfather Clock is started again.