How do I get my anti-theft light to go off?
Insert your car key into the ignition and turn it on just so that the accessories activate, but not the engine. Step 3: Do a secondary check on the anti-theft light. If it is no longer blinking, turn the key to the “off” position and let your car sit for a couple of minutes.
How do I get my Ford out of security mode?
Key
- Insert the key into the driver’s side door lock.
- Turn the key once, but not all the way to unlock the door. Leave the key in this position for 40-60 seconds.
- Do this again, but turn the key in the opposite direction.
- Remove the key from the door, get into your Ford, and start the engine. The system should be reset.
How do you turn off the anti-theft on a 2000 Ford Windstar?
How to Disable the Alarm on a 2000 Ford Windstar
- Enable the alarm by either pressing the remote entry lock control or the interior power door lock control when the door is open.
- Disable the alarm by pressing the transmitter unlock control.
- Deactivate the alarm by unlocking the doors with a key.
Why is my anti-theft light blinking?
The Anti-theft Light in the dash of your car should flash periodically to show that the system is engaged and active. You have to lock the doors of the car (without it running) for the alarm to engage.
Will a bad battery cause security light to come on?
Hello. On your particular vehicle the security light staying on as the vehicle is running is an indication that the security system has failed and is disabled. It is common for a security light to come on after battery dies because the computer may lose its programming to the key.
What causes anti-theft light?
If the security or anti-theft light is flashing when you attempt to start your car, and the engine does not crank or does not start, you have an anti-theft problem. The system may not be recognizing your key or keyless entry signal, or there may be a fault in the anti-theft module, keyless entry system or wiring.
Why is there a red light blinking on my dashboard?
1 Answer. That red flashing light is more than likely part of your vehicles security system. When it’s flashing, it means your car is locked and the system is activated. Once you unlock the car with your key fob the system turns off so you can start the car.
How do I reset my van immobiliser?
Hold the panic button for five seconds to reset the immobilizer. Then press the lock button twice and wait ten meters from the car for ten minutes.
What does it mean when security light stays on?
On your particular vehicle the security light staying on as the vehicle is running is an indication that the security system has failed and is disabled. It is common for a security light to come on after battery dies because the computer may lose its programming to the key.
How do you start a car when the security light is on?
If nothing happens or the engine starts and dies, the security light will be flashing. Leave the key in the On position and wait ten minutes. The flashing light should go off or illuminate without flashing. When it does, turn the ignition off, wait twenty seconds, and then try to start the engine.